Audio - Sound Devices PIX 260i User Manual

PIX 260i User Guide and Technical Information
# Parameter Name
Down Conversion
5
Input PsF Detect
6
SDI Output Type
7
8 Video Output OSD

Audio

# Parameter Name
1 Audio Mode Sample Rate
Audio Mode Bit Depth
2
Audio Mode Pre-Roll Time
3
4 Input Gain Linking
5 Input Delay Linking
6 HDMI/AES Select
70
v. 1.50 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Description
Method for converting HD input video to SD recorded
content.
When set to "Auto", the PIX will sense PsF signal
based on a flag within the signal stream. Most devices
with SDI output will provide this flag, however some
SDI outputs and all HDMI outputs will not provide this
flag. When sending PsF signal from these devices,
choose "Interpret 1080i as PsF"
HD output type employs SMPTE 292M / HD-SDI on
SDI output. 3G output type employs SMPTE 424M /
3G-SDI on SDI output.
Superimpose the current timecode over the video sig-
nal on the selected output. Timecode value appears in
lower left corner of the frame.
Description
The sample rate of recorded .wav files
The bit depth of recorded .wav files
The amount of pre-record buffer for audio-only record-
ing. 0-10 seconds in 1 second increments.
When Input Gain is linked, adjusting an Input's gain
adjusts all other Input Gains by the same amount. Any
offsets at the time of linking are maintained.
When Input Delay is linked, adjusting an Input's delay
adjusts all other Input delays by the same amount.
Any offsets at the time of linking are maintained.
Choose between HDMI or AES for digital audio input.
Options
» 16:9->4:3 Letterbox
• 16:9->4:3 Crop
• 16:9->4:3 Anamorphic
» Auto
• Interpret 1080i as PsF
» HD (4:2:2 10-bit)
• 3G (4:4:4 12-bit)
» Off
• SDI out
• HDMI out
• SDI + HDMI out
Options
• 44.1 kHz
• 47.952k
• 47.952kF
» 48k
• 48.048k
• 48.048kF
• 16-bits
» 24-bits
» 2 secs
(numeric)
» Off
• On
» Off
• On
» HDMI Inputs
• AES Inputs