Factory Restore; Firmware Upgrades - Sound Devices PIX 260i User Manual

The Settings Customization Menu option Reset to Factory Settings will make all Setup Menu items
visible and revert default settings to factory defaults.

Factory Restore

To fully restore the unit to its factory firmware state, hold the FF and STOP buttons while booting
the PIX 260i up, until the Main View appears. This will load factory default settings and restore some
settings that are normally not affected by performing [Quick Setup - Load Factory Settings], such as
restoring the network user name and password to "guest".

Firmware Upgrades

At times, Sound Devices makes firmware updates available for PIX 260i. These updates are easy to
apply:
1. Download the new .prg file from the Sound Devices website.
2. Copy this file to an approved drive, and connect to the PIX 260i.
3. Ensure that the power source for the PIX 260i is reliable. Power loss during a firmware up-
grade process can produce unexpected results.
4. From the System menu in the Setup Menu, select Firmware Update. The PIX 260i will search
for the .prg file and give the option to install the first file that it finds (cancelling this dialog
will cause the PIX to search for another .prg on any attached storage devices). When the cor-
rect .prg file has been located, highlight the OK button and press the Control Knob to begin
the firmware update.
5. The PIX will verify that the file is not corrupted, then it will update the firmware. When done
the unit will need to be powered down and then back up.
Firmware updates can take several minutes to complete. Never pull power during a firmware update.
PIX 260i User Guide and Technical Information
67