Internet Security Router User's Manual
6
Configuring WAN Settings
This chapter describes how to configure WAN settings for the WAN interface on the Internet Security Router
that communicates with your ISP. You'll learn to configure IP address, DHCP and DNS server for your WAN in
this chapter.
6.1
WAN Connection Mode
Three modes of WAN connection are supported by the Internet Security Router – PPPoE, dynamic IP and
static IP. You may select one of the WAN connection modes required by your ISP from the Connection Mode
drop-down list in WAN Configuration page as shown in Figure 6.1.
6.2
PPPoE
6.2.1
WAN PPPoE Configuration Parameters
Table 6.1describes the configuration parameters available for PPPoE connection mode.
Figure 6.1. WAN PPPoE Configuration Page
Chapter 6. Configuring WAN Settings
Connection
Mode drop-
down list
31