Internet Security Router User's Manual
1. Log into Configuration Manager, click the System Management menu and then click the
Firmware Upgrade
2. In the Firmware text box, enter the path and name of the firmware image file. Alternatively, you
may click on
3. Click on
firmware upgrade. Note that after the transfer of firmware is completed, the Internet Security
Router will reboot to make the new firmware in effect.
12.7 Reset the Internet Security Router
To reset the Internet Security Router, click on the
submenu. The Firmware Upgrade page displays, as shown in Figure 12.9.
Figure 12.9. Firmware Upgrade Page
button to search for it on your hard drive.
button to update the firmware. Note: it may take up to 5 minutes for the
Figure 12.10. Configuration Manager Reset Page
Chapter 12. System Management
button in the Configuration Manager Reset page.
129