Page 2
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
Quick Start Guide Warranty card NOTES: • If any of the items are damaged or missing, contact ASUS for technical inquiries and support. Refer to Service and Support at the back of this user manual. • Keep the original packaging material in case you would need...
1.3 Your wireless router LAN LED Off: No power or no physical connection. On: Has physical connection to a local area network (LAN). WAN (Internet) LED Red: No IP or no physical connection. On: Has physical connection to a wide area network (WAN). 6GHz LED Off: No 6GHz signal.
Page 7
Power switch Press this switch to power on or off the system. Reset button This button resets or restores the system to its factory default settings. 10G WAN/LAN1 port Connect a network cable into this port to establish 10G WAN/LAN1 connection.
• Always update to the latest firmware. Visit the ASUS website at https://www.asus.com to get the latest firmware updates. • Orient the antennas as shown in the drawing below.
1.5 Setup Requirements To set up your wireless network, you need a computer that meets the following system requirements: • Ethernet RJ-45 (LAN) port (10Base-T/100Base- TX/1000BaseTX) • IEEE 802.11a/b/g/n/ac/ax wireless capability • An installed TCP/IP service • Web browser such as Internet Explorer, Firefox, Safari, or Google Chrome NOTES: •...
• Use a wired connection when setting up your wireless router to avoid possible setup problems. • Before setting up your ASUS wireless router, do the following: • If you are replacing an existing router, disconnect it from your network.
To set up your wireless router via wired connection: 1. Plug your router into a power outlet and power it on. Connect the network cable from your computer to a LAN port on your router. RT-BE92U Modem LINE RESET Laptop...
B. Wireless connection To set up your wireless router via wireless connection: 1. Plug your router into a power outlet and power it on. RT-BE92U Smart phone Modem Tablet LINE RESET Wall Power Outlet Power Laptop 2. Connect to the network name (SSID) shown on the product label on the back side of the router.
Page 13
NOTE: For details on connecting to a wireless network, refer to the WLAN adapter’s user manual.
Reset button on your wireless router to reset it to its factory default settings. To use QIS with auto-detection: 1. Launch a web browser. You will be redirected to the ASUS Setup Wizard (Quick Internet Setup). If not, key in http://www.asusrouter.com manually.
Page 15
NOTES: • The auto-detection of your ISP connection type takes place when you configure the wireless router for the first time or when your wireless router is reset to its default settings. • If QIS failed to detect your Internet connection type, click Manual Setting and manually configure your connection settings.
Page 16
4. On the Login Information Setup page, change the router’s login password to prevent unauthorized access to your wireless router. NOTE: The wireless router's login username and password is different from the 2.4GHz/5GHz/6GHz network name (SSID) and security key. The wireless router's login username and password allows you to log into your wireless router's Web GUI to configure your wireless router's settings.
2.3 Connecting to your wireless network After setting up your wireless router via QIS, you can connect your computer or other smart devices to your wireless network. To connect to your network: 1. On your computer, click the network icon in the notification area to display the available wireless networks.
Point (AP) mode? Can I add my home router to the AiMesh system? Will AiProtection and Adaptive QoS work with AiMesh? Can I set up an AiMesh system with an ASUS router and another brand of router(s)? What is whole-home mesh Wi-Fi? How to set up a reliable mesh Wi-Fi system in a 780 m (approx.
Firmware upgrade/reset/restore ASUS router’s Hard Factory Reset How to use Rescue Mode (Firmware Restoration)? How to upgrade the firmware of my ASUS router to the latest version (Web GUI)? Firmware upgrade failed. How to upload the configuration files of my ASUS router? How to save System Log in my ASUS router? Why can’t I sometimes download or update the operating...
How do I set up IPv6 - FLET’S IPv6 service? How to set up an IPv6 firewall? The DDNS service and the VPN function of ASUS wireless router do not support IPv6. How to set up IPTV on ASUS router?
How to set up the media bridge mode? Parental Controls How to set up Parental Controls via WebGUI? How to set up Family (Parental Controls) via ASUS Router app? How to set up One-Tap Safe Browsing (Parental Controls) via ASUS Router app?
How to access my ASUS router’s Web GUI setting page via HTTPS? What is CAPTCHA? How is it implemented? I cannot log into the Web GUI of ASUS router with my username and password. How do I access the setup page of my ASUS router via...
Failed Internet access through router Why does the internet status show as connected while there is no internet before setting up the ASUS router? The computer cannot access to Internet via wireless connection to the router. How to check the wired connection speed and network...
How to set up WireGuard server? ® How to set up a VPN server on ASUS router - IPSec VPN? How to set up a VPN server on ASUS router - OpenVPN? How to set up a VPN server on ASUS router - PPTP?
IPSec VPN set up on iOS IPSec VPN set up on Mac WAN / Dual WAN Plug, Share & Surf: Turn your ASUS router into a 4G/5G hotspot instantly (4G / 5G Auto Mobile Tethering) Dual WAN introduction and setup...
What is multi-service WAN and how to use it? How to find a best DNS server? Wi-Fi What can I do if I forgot my ASUS router’s WiFi password? What’s the difference between 2.4GHz and 5GHz? How to disable my ASUS router’s WiFi signal? WiFi connection often disconnects.
• Medical device interference: Maintain a minimum distance of at least 15 cm (6 inches) between implanted medical devices and ASUS products to reduce the risk of interference. • Kindly use ASUS products in good reception conditions to minimize the radiation's level.
Page 28
WARNING! • DO NOT place on uneven or unstable work surfaces. • DO NOT place or drop objects on the top of the product. Avoid exposing the product to mechanical shock such as crushing, bending, puncturing or shredding. • DO NOT disassemble, open, microwave, incinerate, paint, or shove any foreign objects into this product.
Need help?
Do you have a question about the RT-BE92U and is the answer not in the manual?
Questions and answers