Access User Group Configuration Page - (Remote Access È User Group); Add A User Group And/Or A User; Figure 11.1. User Group Configuration Page - Asus Internet Security Router User Manual

Chapter 11. Configuring Remote Access
Field
User Name
User State
Password
Confirm Password
11.2.2 Access User Group Configuration Page – (Remote Access è User Group)
Log into Configuration Manager as admin, click the Remote Access menu, and then click the User Group
submenu. The User Group Configuration page displays, as shown in Figure 11.2.
Note that when you open the User Group Configuration page, a list of users is displayed at the bottom half of
the configuration page such as those shown in Figure 11.2.

11.2.3 Add a User Group and/or a User

To add a user group and a new user, follow the instructions below:
1. Open the User Group Configuration page (see section 11.2.2 Access User Group Configuration
Page – (Remote Access è User Group)).
2. Select "Add New User Group" from the user group drop-down list.
3. Enter a name into the User Group Name field. Make sure that this name is unique among the
existing groups. Note that the group name is case sensitive. For example, Group1 and group1
are treated as separate groups.
4. Click on the "Enable" or "Disable" radio button in the Group State field to enable or disable this
group.
5. Enter inactivity timeout period. Default is 300 seconds.
110
Description
Enter a unique User name for the user that you would like to add.
Click on the Enable or Disable radio button to enable or disable the user.
Disabling the user will force the user to be disconnected. Further login from
that specific user will be disabled. Enabling the user will allow the specific
user to log in.
Enter the User's password.
Enter the User's password again for confirmation. Make sure that you enter
the same password as what you entered in the "Password" field.

Figure 11.1. User Group Configuration Page

Internet Security Router User's Manual
User Group
drop-down list
User drop-
down list