Hardware Installation; Connecting Via A Cable; Connecting Wirelessly - NetComm NB16DG User Manual

Hardware installation

1. Connect the power adapter to the Power socket on the back of the NB16DG.
2. Plug the power adapter into the wall socket and switch on the power.
3. Wait approximately 60 seconds for the NB16DG to power up.

Connecting via a cable

1. Connect the yellow Ethernet cable provided to one of the ports marked 'LAN' at the back of the NB16DG.
2. Connect the other end of the yellow Ethernet cable to your computer.
3. Wait approximately 30 seconds for the connection to establish.
4. Open your Web browser, and enter
5. Follow the steps to set up your NB16DG.

Connecting wirelessly

1. Ensure Wi-Fi is enabled on your device (computer/laptop/Smartphone).
2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name
configured on the NB16DG.
Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your NB16DG
3. When prompted for your wireless security settings, enter the Wireless security key configured on the NB16DG.
4. Wait approximately 30 seconds for the connection to establish.
5. Open your Web browser, and enter
6. Follow the steps to set up your NB16DG.
www.netcommwireless.com
http://192.168.20.1 into the address bar and press enter.
http://192.168.20.1 into the address bar and press Enter.
NetComm Wireless NB16DG User Guide
12