NetComm NB16DG User Manual page 55

QoS
Quality of Service (QoS) provides different priority to different users or data flows. It can also guarantee a certain level of
performance.
OPTION
QoS
WAN Interface
QoS Mode
Bandwidth of Upstream
Bandwidth of Downstream
The lower section of the screen lets you manually assign a percentage of bandwidth to the different service types. If you manually
assign QoS, the total percentage must add up to 90%. The remaining 10% of bandwidth is reserved for other types of network
traffic.
For advanced QoS configuration, use the QoS Mode drop down list to select User-defined QoS Rule to display the QoS rules
table. Click the Add A New Rule button to configure a new QoS rule.
OPTION
Rule
Class
Class Info
Function
Function data - Priority
Direction
Schedule
Note: For further instructions on scheduling rules, please refer to the "Scheduling" section later in this guide
Click on Save to store your setting or Undo to discard your changes.
NetComm Wireless NB16DG User Guide
55
Use the drop down list to Enable or Disable QoS.
Use the drop down list to select the interface to which QoS should apply.
Use the drop down list to select the type of QoS to apply. Smart-QoS lets the router devide on the best settings based
on the types of service you select below and the percentage setting assigned to each type of service. Higher
percentages give a higher quality of service for that service type.
Enter the upstream bandwidth in Kilobits per second of your connection so that the router can calculate the best QoS
settings.
Enter the downstream bandwidth in Kilobits per second of your connection so that the router can calculate the best
QoS settings.
Select to enable or disable the QoS rule.
Select the class of traffic you would like to prioritise.
Enter the range of IP addresses of the class.
Select the function of the rule. You can select from Priority, Max Rate, Session, Drop, Log or Alert.
Enter a priority value from 1 to 6 with 1 being the highest.
Select the direction of traffic to prioritise. Available options include In, Out or Both.
Select a schedule for the new rule to apply. Previously created schedules are visible here or you can select the rule to
always apply.
DEFINITION
DEFINITION
www.netcommwireless.com