Advertisement
THANKS FOR PURCHASING NETCOMM WIRELESS
This quick start guide is designed to get you up and running quickly with your new router. More
advanced set up instructions can be found in the user manual which can be downloaded from
www.netcommwireless.com
HARDWARE INSTALLATION
If you are using a 3G/4G connection
1.
Connect your 3G/4G USB modem to the USB port on the top panel of the router.
2.
Ensure the 4G/WAN switch on the back of the router is set to 4G.
3.
Connect the power supply unit to the DC IN port on the rear panel of the router, plug the
other end into a wall socket and switch on the power.
4.
Wait approximately 60 seconds for the 4GM3W to boot up.
CONNECTING TO THE ROUTER WITH ETHERNET
1.
Connect the supplied yellow Ethernet cable to the WAN/LAN port.
2.
Connect the other end of the Ethernet cable to your computer or to another Ethernet
enabled device like a gaming console, a TV or a home cinema system.
3.
Wait approximately 30 seconds for the connection to be established
CONNECTING TO THE ROUTER WITH WIFI
You can connect multiple wireless devices, including laptops, desktops and PDA's to your
router by following these two basic steps.
1.
Using your wireless device, scan the wireless networks in your area and select the wireless
network name listed on the included Wireless Security Card and then click connect.
Please note: If you change the default wireless network name at any time, select the wireless network displaying the new name you entered.
2.
Enter the wireless security key listed on the included Wireless Security Card.
Please note: If you change the default wireless security password at any time, enter the new password you entered.
To ensure wireless security, we recommend that you change the default settings through the
web based user interface.
NetCommWireless
1
3
2
Advertisement
