1
1. Attach the supplied antennas to the circular antenna ports on the back of
the NetComm NP805N. (these should be attached onto the ports in a
clockwise direction)
2. Connect an Ethernet cable from the LAN port on your ADSL/Cable/3G device to
the WAN port on the NetComm NP805N.
3. Connect the power adapter to the power socket on the back of the
NetComm NP805N.
4. Plug the power adapter into the wall socket and switch on the power.
5. Wait approximately 60 seconds for the NetComm NP805N to power up.
Hardware Installation
Modem
1
2
1
3
Power adapter
wall socket
4