Ford Mercury Villager 1997 Owner's Manual page 253

4. Use the fuse puller tool to remove the blown fuse and replace
the fuse with one that has the right amperage rating (see the
fuse panel cover for amperage ratings).
Always replace a fuse with one that has the specified
amperage rating. Using a fuse with a higher amperage rating
can cause severe wire damage and could start a fire.
5. Put the fuse panel cover back on.
Even after you replace a fuse, it may continue to blow if you do
not find what caused the overload. If the fuse continues to
blow, have your electrical system checked.
The following chart indicates the colors and amperage ratings of
standard fuses.
sv0051-b
Roadside Emergencies
WARNING
249