Ford Mercury Villager 1997 Owner's Manual page 222

Stopping Distances
Stopping distances vary with different loads and driving
conditions. Use caution when you drive under new conditions
and acquaint yourself with your vehicle's performance.
Applying the Brakes
Apply the brake pedal evenly. Use the "squeeze" technique. Push
on the brake pedal with a steadily increasing force. This allows
the wheels to continue to roll while you are slowing down, which
lets you steer properly. In the event of a sudden stop with ABS
equipped vehicles, do not pump the brakes. Pumping the brakes
during an anti-lock stop will diminish braking effectiveness.
Do not drive with your foot resting on the brake pedal. This will
increase your vehicle's stopping distance and may also cause
brake damage.
If you are driving down a long or steep hill, shift to a
lower gear. Do not apply your brakes continuously, as they
may overheat and become less effective.
Using the Parking Brake
The parking brake pedal is suspended just below the bottom of
the instrument panel to the left of the brake pedal. To set the
parking brake, press the brake pedal with your right foot and
hold it while you push the parking brake pedal down firmly with
your left foot.
218
WARNING