Daylight Saving Time - TP-Link TL-SL3428 User Manual

Note:
1. The system time will be restored to the default when the switch is restarted and you need to
reconfigure the system time of the switch.
2. When Get Time from NTP Server is selected and no time server is configured, the switch will
get time from the time server of the Internet if it has connected to the Internet.

4.1.4 Daylight Saving Time

Here you can configure the Daylight Saving Time of the switch.
Choose the menu System→System Info→Daylight Saving Time to load the following page.
The following entri es are displayed on this screen:
DST Config

DST Status:
Predefined Mode:
Recurring Mode:
Figure 4-6 Daylight Saving Time
Enable or Disable DST.
Select a predefined DST
 USA: Second Sunday in March, 02:00 ~ First Sunday in
November, 02 :00.
 Australia: First Sunday in October, 02:00 ~ First Sunday in
April, 03:00.
 Europe: Last Sunday in March, 01:00 ~ Last Sunday in
October, 01:00.
 New Zealand: Last Sunday in September, 02:00 ~ First
Sunday in April, 03:00.
Specify the DST configuration in recurring mode. This
configuration is recurring in
 Offset: Specify the time adding in minutes when Daylight
Saving Time comes.
 Start/End Time: Select starting time and ending time of
Daylight Saving Time.
15
configuration:
use: