Port Config - TP-Link TL-SL3428 User Manual

Auth Method:
Guest VLAN:
Guest VLAN ID:
Authentication Config

Quiet:
Quiet Period:
Retry Times:
Supplicant Timeout:
Server Timeout:

11.4.2 Port Config

On this page, you can configure the 802.1X features for the ports basing on the actual network.
Choose the menu Network Security→802.1X→Port Config to load the following page.
Select the Authentication Method from the pull-down list.

EAP-MD5: IEEE 802.1X authentication system
uses extensible authentication protocol (EAP) to
exchange information between the switch and the
client. The
authentication data can be encapsulated in the
advanced protocol (such as RADIUS) packets to be
transmitted to the authentication server.

PAP: IEEE 802.1X authentication system uses
extensible authentication
exchange information between the switch and the
client. The transmission of EAP packets is
terminated at the switch and the EAP packets are
converted to the other protocol (such as RADIUS)
packets for transmission.
Enable/Disable the Guest VLAN feature.
Enter your desired VLAN ID to enable the Guest VLAN
feature. The supplicants in the Guest VLAN can access
the specified network source.
Enable/Disable the Quiet timer.
Specify a value for Quiet Period. Once the supplicant
failed to the 802.1X Authentication, then the switch will not
respond to the authentication request from the same
supplicant during the Quiet Period.
Specify the maximum transfer times of the repeated
authentication request.
Specify the maximum time for the switch to wait for the
response from supplicant before resending a request to
the supplicant.
Specify the maximum time for the switch to wait for the
response from authentication server before resending a
request to the authentication server.
165
EAP protocol packets
protocol
with
(EAP) to