Policy Binding; Binding Table - TP-Link TL-SL3428 User Manual

S-Condition:
Redirect:

10.4 Policy Binding

Policy Binding function can have the policy take its effect on a specific port/VLAN. The policy will
take effect only when it is bound to a port/VLAN. In the same way, the port/VLAN will receive the
data packets and process them based on the policy only when the policy is bound to the
port/VLAN.
The Policy Binding can be implemented on Binding Table, Port Binding and VLAN Binding
pages.

10.4.1 Binding Table

On this page view the policy bound to port/VLAN.
Choose the menu ACL→Policy Binding→Binding Table to load the following page.
The following entries are displayed on this screen:
Search Option

Show Mode:
Policy Bind Table

Select:
Index:
Policy Name:
Interface:
Direction:
Select S-Condition to limit the transmission rate of the data packets in
the policy.
 Rate: Specify the forwarding rate of the data packets those match
the corresponding ACL.
 Out of Band: Specify the disposal way of the data packets those
are transmitted beyond the rate.
Select Redirect to change the forwarding direction of the data packets
in the policy.
 Destination Port: Forward the data packets those match the
corresponding ACL to the specific port.
Figure 10-12 Binding Table
Select a show mode appropriate to your needs.
Select the desired entry to delete the corresponding binding policy.
Displays the index of the binding policy.
Displays the name of the binding policy.
Displays the port number or VLAN ID bound to the policy.
Displays the binding direction.
136