System Time - TP-Link TL-SL3428 User Manual

Device Location:
System Contact:

4.1.3 System Time

System Time is the time displayed while the switch is running. On this page you can configure the
system time and the settings here will be used for other time-based functions like ACL.
You can manually set the system time, get UTC automatically if it has connected to an NTP server
or synchronize with PC's clock as the system time.
Choose the menu System→System Info→System Time to load the following page.
The following entries are displayed on this screen:
Time Info

Current System Date:
Current Time Source:
Time Config

Manual:
Get Time from NTP
Server:
Synchronize with
PC'S Clock:
Enter the location of the switch.
Enter your contact information.
Figure 4-5 System Time
Displays the current date and time of the switch.
Displays the current time source of the switch.
When this option is selected, you can set the date and time
manually.
When this option is selected, you can configure the time zone
and the IP address for the NTP Server. The switch will get UTC
automatically if it has connected to an NTP Server.
Time Zone: Select your local time.

Primary/Secondary NTP Server: Enter the IP address for

the NTP Server.
Update Rate: Specify the rate fetching time from NTP

server.
When this option is selected, the administrator PC's clock is
utilized.
14