Protocol Vlan; Protocol Template - TP-Link TL-SL3428 User Manual

3. If the Protocol VLAN is created, please set its enabled port to be the member of
corresponding 802.1Q VLAN so as to ensure the packets forwarded normally.

6.2.1 Protocol VLAN

On this page, you can create Protocol VLAN and view the information of the current defined
Protocol VLANs.
Choose the menu VLAN→Protocol VLAN→Protocol VLAN to load the following page.
The following entries are displayed on this screen:
Create Protocol VLAN

Protocol:
VLAN ID:
Protocol VLAN Table

Select:
Protocol:
Ether Type:
VLAN ID:
Operation:

6.2.2 Protocol Template

The Protocol Template should be created before configuring the Protocol VLAN. By default, the
switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more
Protocol Template on this page.
Choose the menu VLAN→Protocol VLAN→Protocol Template to load the following page.
Figure 6-7 Create Protocol VLAN
Select the defined protocol template.
Enter the ID number of the Protocol VLAN. This VLAN should be one
of the 802.1Q VLANs the ingress port belongs to.
Select the desired entry. It is multi-optional.
Displays the protocol template of the VLAN.
Displays the Ethernet protocol type field in the protocol template.
Displays the corresponding VLAN ID of the protocol.
Click the Edit button to modify the settings of the entry. And click the
Modify button to apply your settings.
62