Xante Accel-a-Writer 8200 Troubleshooting Manual page 14

until MISC:STRTUP PAGE appears in the display
window and press the Enter
If STRTUP PAGE:YES is capitalized, this feature
is already enabled; if so, press the On Line key
and skip to the next bullet item in this list. If not,
press the Enter
then press the On Line key. Turn the printer off
and back on; the start-up page should print.
• Check the display window on the front panel for
messages.
• Make sure the toner cartridge is installed.
• Make sure that the source cassette or tray is
selected and it has media loaded. If you use a
cassette, make sure it is seated firmly in the
printer.
• Remove the paper cassette from the printer. If
there is no front panel activity or engine light
activity, replace the paper cassette, turn the printer
off and try to start it again.
§ The printer powers up, but I cannot print from my application.
Possible Solutions:
• Make sure all cables are connected and seated
properly.
• Make sure the printer is on line. The On Line key
LED should be lit and the display window should
read READY/IDLE or READY/PRINTING. If
not, press the On Line key once to put the printer
on line.
• If you work in a Macintosh environment, make
sure the printer is selected in the Chooser.
10-14 Troubleshootingbb____________________________________
key.
key to select this option, and