§
Horizontal banding on images occurs when printing.
Possible Solutions:
•
Use a new toner cartridge, not a refilled toner
cartridge.
•
Clean the printer. See chapter 8, "Maintenance,"
for details.
•
Remove the toner cartridge and redistribute the
toner. See "Redistributing Toner" in chapter 6 for
details.
•
Install a new toner cartridge. Remember, a new
cartridge may need a short break-in run of several
copies since toner can settle during storage. See
"Handling and Replacing the Toner Cartridge" in
chapter 6 for details.
•
Adjust the toner density to a lighter setting. See
"Adjusting the Density Dial" in chapter 6 for
details.
•
Replace the media with new media, making sure it
meets all the requirements in the "Media
Handling" section of chapter 6.
•
Adjust the screen frequency for the images within
the applications. The printer default screen
frequency is 85 lpi. Also, see chapter 7,
"Advanced Imaging," for more details on screen
frequency.
•
Set the printer for a resolution higher than 600 dpi
if one is available. See "The Configuration Menu
Structure" section in chapter 5 for details.
_____________________________________ Troubleshooting 10-19