Xante Accel-a-Writer 8200 Troubleshooting Manual page 18

§ The solid black print is washed out.
Possible Solutions:
• Clean the printer. See "Cleaning the Printer" in
chapter 8 for details.
• Remove the toner cartridge and redistribute the
toner. See "Redistributing Toner" in chapter 6 for
details.
• Set the toner density to a heavier setting. See
"Adjusting the Density Dial" in chapter 6 for
details.
• Use laser quality media and make sure it meets all
the requirements in the "Media Handling" section
of chapter 6.
• Install a new toner cartridge. See "Handling and
Replacing the Toner Cartridge" in chapter 6 for
details.
§ Scanned images are dark and the details are lost.
Possible Solutions:
• Check the original image to see if it is dark. If not,
rescan the image and try to print it again.
• Try increasing the gamma corrections setting on
your printer. Even if the original image which you
scanned is too dark, the gamma feature on your
printer allows you to adjust midrange grayscale
values without altering the black shadow or white
highlight values. This can bring out details in the
midranges. See "Making Gamma Corrections" in
chapter 7 for details.
10-18 Troubleshootingbb____________________________________