Calling For Technical Support - Xante Accel-a-Writer 8200 Troubleshooting Manual

§ The start-up page has banding along the pages's horizontal axis.
Possible Solutions:
•
•
•
•
§ Under Windows, character spacing is altered, changing
pagination when printing a document at a resolution that is
different than the resolution defined when it was created.
Possible Solution:
•

Calling for Technical Support

You can solve most printer problems by following the suggestions in
this chapter. Be sure to read this chapter before calling for technical
support. If these solutions do not work, gather the following
troubleshooting information, and then call XANTÉ's Technical
Support.
_____________________________________ Troubleshooting 10-21
Clean the printer. See "Cleaning the Printer" in
chapter 8 for details.
Remove the toner cartridge and redistribute the
toner. See "Redistributing Toner" in chapter 6 for
details.
Install a new toner cartridge. Remember, a new
cartridge may need a short break-in run of several
copies since toner can settle during storage. See
"Handling and Replacing the Toner Cartridge" in
chapter 6 for details.
Replace the media with new media, making sure it
meets all the requirements in the "Media
Handling" section of chapter 6.
Make sure you select a resolution in your
application that is available in your printer.