Table of Contents
Advertisement
ECOWATER
S Y S T E M S
SERVICE REMINDER (set / reset)
Use this feature to program the number of months (up
to 24) before a "Service overdue" message will appear
instead of the rolling status screens (See Figure 77).
This message also appears on the remote. This will be
a reminder to call your dealer for service. Once pro-
grammed, this feature displays the number of months
and days left until the service reminder.
Once the "Service overdue" message has appeared,
dealers performing service clear it by setting the num-
ber of months until the next service reminder. Set or
reset the service reminder as follows:
1. From any of the rolling status screens, press the
SELECT ( ) button to display the Main menu.
2. Press the DOWN ( ) button to scroll through the
menu options until Advanced settings is highlighted.
3. Press the SELECT ( ) button to display the
Advanced settings menu.
4. Press the DOWN ( ) button to scroll through the
menu options until Special features is highlighted.
5. Press the SELECT ( ) button to display the Special
features menu (See Figure 78).
6. Press the DOWN ( ) button to scroll through the
menu options until Service reminder is highlighted.
7. Press the SELECT ( ) button to display the Service
reminder screen (See Figure 79).
8. Press the UP ( ) or DOWN ( ) buttons to set the
number of months until the service reminder
appears. Repeatedly pressing the DOWN ( ) but-
ton until the display reads "Off" turns this feature off
and zeros the number of months and days.
9. Press the SELECT ( ) button. The display will go
back to the Special features menu (Figure 78).
10. Press the LEFT ( ) button three times to return to
the rolling status screens.
SEND E.A.S.E. MESSAGE
With E.A.S.E. (Electronic Automated Service
Evaluation), a homeowner or service technician can
transmit operational data via a telephone for diagnostic
purposes. Ask your participating EcoWater Systems
dealer for more information.
To send an E.A.S.E. message:
1. From any of the rolling status screens, press the
FIG. 77
SELECT ( ) button to display the Main menu.
2. Press the DOWN ( ) button to scroll through the
menu options until Advanced settings is highlighted.
3. Press the SELECT ( ) button to display the
Advanced settings menu (See Figure 80).
4. Press the DOWN ( ) button to scroll through the
menu options until Troubleshooting is highlighted.
5. Press the SELECT ( ) button to display the
Troubleshooting menu (See Figure 81).
6. Make sure Send EASE message is highlighted.
7. With the phone ready, press the SELECT ( ) button
to display the Send EASE message screen and
FIG. 78
begin transmission.
8. Hold the phone's receiver an inch or two above the
E.A.S.E. port on the conditioner/refiner's faceplate
(See Figure 7 on Page 8). Maintain the receiver
steadily in this position during the entire transmis-
sion.
FIG. 79
9. A bar is displayed showing the transmission's
progress (See Figure 82). Once completed, the
Troubleshooting screen immediately reappears
(Figure 81).
10. Press the LEFT ( ) button three times to return to
the rolling status screens.
20
Conditioner/Refiner Operation
FIG. 80
FIG. 81
FIG. 82
Hide quick links:
Advertisement
Table of Contents
