Axis NAS 100 User Manual page 42

Section 4: NetWare (NCP)
Authentication to a
NetWare 3.x Server
Default Access Rights
Note:
Setting Security Rights
in NetWare Bindery
Note:
42
For access to a StorPoint NAS connected to a NetWare 3.x server,
authentication is done against the user list in the bindery of the NetWare server:
• If a user is on the list, the password will be verified. If the password is
correct, the user will be granted access.
• If the password is incorrect, login will fail.
If a user is not on the list, he will not be granted access to StorPoint NAS.
However, he could login as 'guest' and get access to volumes that are not
protected.
The default access rights in NetWare bindery mode are set up by the following
trustee assignments:
• The root of the SYS volume has [EVERYONE] as trustee, with File Scan,
Read, Write, Create, Modify and Erase rights.
• The System folder has all rights, except Supervisor, filtered. Thus all system
files are effectively protected from normal users.
You can use Filer to change the default access rights.


The security rights can be set using standard procedures, e.g. Filer.
To make all the volumes available to some users only, follow these steps:
1. Login as Supervisor on your StorPoint NAS. In order for Filer to access
StorPoint NAS, the client must have an active connection.
2. Login as Supervisor on your NetWare Bindery file server and start Filer.
3. Change the current directory to AXIS<nnnnnn>_NW/SYS:.
4. Remove the [EVERYONE] trustee from the root.
5. Add a new trustee assignment to the root.
To restrict access to a particular volume, follow these steps:
1. Login as Supervisor on your StorPoint NAS. In order for Filer to access
StorPoint NAS, the client must have an active connection.
2. Login as Supervisor on your NetWare Bindery file server and start Filer.
3. Change the current directory to AXIS<nnnnnn>_NW/SYS:.
4. On the resource you want to protect, set an inherited rights filter and filter ALL
rights.
5. Add the new trustee assignment to the resource. This makes it available only
to the users in the trustee list.
The NetWare bindery access rights for a StorPoint NAS can be set using


Group and User Objects as with any other file server.
You can always access your StorPoint NAS using the user name Supervisor


and the password specified by the Server Password parameter. By default the
password is .
pass
AXIS StorPoint NAS 100 User's Manual