Table of Contents
Advertisement
Date & Time
AXIS StorPoint NAS 100 User's Manual
1. On the This StorPoint page, click Settings to open the Server Settings
dialog box.
2. Open the Date & Time page.
3. Specify the time zone in which your StorPoint NAS operates. Refer to
"Time Zone Parameter Values" on page 69.
4. To set the time using a time synchronization source, choose Automatically and
specify the time source:
Network
environment
NetWare IPX
NetWare PureIP
NetWare/IP
TCP/IP
Windows NT
domains
* Note: NTP is not natively supported by Windows NT servers. You will need third party software.
To set the time manually, choose Manually and specify the date in
format, and time in
yy-mm-dd
5. Click Close.
Time Source:
You must also specify the ...
Novell Directory
Time Source parameter on the Network
Services (NDS)
Settings | NetWare page:
- SAP or
- List of server names.
Novell Directory
Time Source parameter on the Network
Services (NDS)
Settings | NetWare page:
- List of server names or IP addresses.
Network Time
NTP Server parameter on the Server
Protocol (NTP) *
Settings | Date & Time page:
- Name or IP address of the time server.
Microsoft Windows
NT Network (SMB)
format using the 24 hour clock.
hh:mm:ss
Section 2: Basic Installation
25
Advertisement
Table of Contents
