Introduction; Installation; Connect The Network And Power Source; Power Over Ethernet - Polycom SoundPoint IP 650 User Manual

Introduction

The Polycom 650 SoundPoint IP is a full‐duplex, hands‐free Session Initiation
Protocol (SIP) phone. It provides telephone features such as Shared Call
Appearance, Call Hold, Call Transfer, and Do Not Disturb.

Installation

The following provides basic installation instructions. Contact your system
administrator for additional information or assistance.

Connect the Network and Power Source

Use Power over Ethernet (PoE) for network and power source connections
unless otherwise directed by your system administrator.
NOTE: The AC power adapter is a separate, optional accessory. Your system
administrator will provide one to you if necessary.

Power over Ethernet

Using a regular CAT5 cable (optional Polycom accessory, the phone can be
powered from a PoE (IEEE 802.3af) compliant switch or hub.
Plug the supplied network cable between the LAN jack on the phone and an
available power and data port on the in‐line power switch.
4