Backlight Intensity; Headset Memory Mode; Enable - Polycom SoundPoint IP 650 User Manual

Backlight Intensity

The SoundPoint IP 650 has three backlight settings: on, idle, and maximum
intensity. You can modify the intensity separately for high, medium, low, and
off levels.
1. Press the Menu button.
2. Select Settings > Basic > Backlight Intensity.
3. Select Backlight On Intensity.
4. Use the up or down arrow keys to scroll to High, Medium, Low, or
Off. The default is set to Medium.
5. Press the Select soft key.
6. Select Backlight Idle Intensity.
7. Use the up or down arrow keys to scroll to High, Medium, Low, or
Off. The default is set to Low.
8. Press the Select soft key.
9. Select Maximum Intensity.
10. Press the up or down soft key to increase or decrease the backlight
intensity.
11. Press the OK or Cancel soft key to accept or cancel changes.
12. Press the Menu button to return to the idle display.

Headset Memory Mode

This feature is useful for permanent or full‐time headset users.

Enable

1. Press the Menu button.
2. Select Settings > Basic > Preferences > Headset > Headset Memory.
3. Use the up or down arrows to scroll to Enabled.
4. Press the Select soft key.
5. Press Menu to return to the idle display.
6. Repeat steps 1‐4 to select Disabled and turn headset memory off, if
applicable.
10