Adjust The Volume; Mute; Call Hold; Multiple Calls On Hold - Polycom SoundPoint IP 650 User Manual

Adjust the
Volume
Press
these keys in the idle status adjusts ringer volume.

Mute

During a call, press
a microphone on the graphic display indicates that the other party (or
parties) cannot hear you.

Call Hold

During a call, press the Hold button or the Hold soft key. The hold icon
appears on the line indicator.
Press Hold again or the Resume soft key to resume the call. The active audio
icon (one of
on hold for an extended period of time, both visual and audible alerts
appear. When active on a call, the ring splash is played at a volume that is
typically lower than the normal ring volume.
NOTE: Calls on hold may generate music, so be careful if you are on a conference call.

Multiple Calls on Hold

If two or more calls are on hold, it is indicated on the display. For example,
"2/3" indicates that this is the second call out of three calls. If calls are on
hold on more than one Line Key, all calls are combined into a single call list.
Pressing a Line Key with calls on hold places the current active call on hold
and resumes the first call on that Line Key.

End a Call

To end a call, perform one of the following steps:
to adjust the receiver volume during a call. Pressing
. The Message Waiting Indicator (MWI) turns red and
) appears on the line indicator. When a call has been
Press the EndCall soft key if you are using a handset.
‐OR‐
Replace the handset.
‐OR‐
Press if in hands‐free/speakerphone mode.
19