Set Up A Conference Using The Join Soft Key; Split A Conference Call; End A Conference Call - Polycom SoundPoint IP 550 User Manual

NOTE: If you press
cannot hear you.
To place a party on hold, select the party and press the Hold soft
key. The held party cannot hear anyone, and no other party can
hear them.
Press the Resume soft key to return the party to the
conference.
To disconnect a party from the conference, press the Remove soft
key. The party is removed from the conference.
You can press the Add soft key to add them again.

Set up a Conference Using the Join Soft Key

When on an active call:
1. From the Manage Conference screen, press the Hold button or the
Hold soft key. The other parties in the conference are placed on hold.
2. Press the NewCall soft key.
3. Call the new party.
4. After the new party answers, press the Join soft key to add them to
the conference.

Split a Conference Call

1. From the Active Conference screen, press the More soft key.
2. Press the Split soft key. All calls are split into individual calls and
placed on hold.

End a Conference Call

From the Active Conference screen, press the EndCall soft key.
‐OR‐
Hang up. The other parties remain connected.
, all other parties can hear each other but they
21