End A Call; Conference Calling; Split A Conference Call; Set Up A Conference Using The Join Soft Key - Polycom SoundPoint IP 320 User Manual

End a Call

Conference
Calling
To end a call, perform one of the following steps:
Press the EndCall soft key if you are using a handset.
‐OR‐
Replace the handset.
‐OR‐
Press if in hands‐free/speakerphone mode.
‐OR‐
Press if in headset mode.
You can initiate a conference call with other parties using the phone's
conference feature.
1. Establish an active call (dialed or received).
2. Press the Conf soft key to create a new call. The active call is places
on hold.
3. Dial the extension or number of the second party followed by #.
4. When the second party answers, announce and press the Conf soft
key again to join all parties together.
NOTE: Once the conference is split, the original conference call ends. If you want to join
the parties back together, you must re‐establish the conference call.

Split a Conference Call

Press the Split soft key to split the conference. Both parties are placed on
hold.

Set up a Conference Using the Join Soft Key

When on an active call:
If you have a call on hold (on the same line or on another line), use
the down arrows to go to the call on hold, the press the Join soft key.
A conference is created with the active call on hold and yourself.
‐OR‐
18