Use the 1/A/a soft key to toggle between numeric and
upper/lower case alphanumeric characters.
Use the Encoding soft key to access special characters.
5. Enter the contact number.
6. Change the Speed Dial Index field, if applicable. It defaults to the next
available value.
7. Press the Save
8. Press the Directories button to return to the idle display.
Assign/Edit Speed Dial
You can associate contacts with Speed Dial codes. When a new entry is
added to the Contact Directory, it is automatically assigned the next available
speed dial value.
1. Press the Directories button.
2. Select Contact Directory.
3. Use the up or down arrow to select a contact. You can also use * to
page up, or # to page down.
4. Press the Edit soft key.
5. Perform one of the following steps:
Enter the next available speed dial value.
Delete the existing speed dial value by pressing
, and then enter a new speed dial value.
6. Press the Save or Cancel button to accept or cancel your changes.
7. Press the Directories button to return to the idle display.
Delete a Contact
1. Press the Directories button.
2. Select Contact Directory.
3. Use the up or down arrows to select the contact. You can also use *
to page up, or # to page down.
4. Press the More soft key twice.
5. Press the Delete soft key. The contact is removed from your
directory.
6. Press the Directories button to return to the idle display.
or Cancel soft key to accept or cancel changes.
14
followed by