Select And Start A Washing Programme - Electrolux ESI 45010 User Manual

of function buttons A , B, and C start
flashing.
3. Press function button B, the lights of
function buttons A and C turn off
while the light of function button B
goes on flashing.
4. To activate the rinse aid dispenser,
press button B again, the End indi-
cator light illuminates, indicating that
the rinse aid dispenser has been ac-
tivated.
5. To memorise the operation, switch
off the dishwasher by pressing the
On/Off button.
6. To deactivate the rinse aid dispenser
again, follow the above instructions
until the End indicator light turns off.
If you decide to turn back to the use
of standard detergent system we
advise that you:

Select and start a washing programme

Select the washing programme and
delay start with the door slightly
opened. The start of the programme
or the countdown of the delay start
will occur only after the closure of
the door. Until then it is possible to
modify the settings
select and start a washing programme electrolux 21
1. Deactivate the Multi-tab func-
tion.
2. Fill up the salt container and the
rinse aid dispenser again.
3. Adjust the water hardness set-
ting to the highest setting and
perform 1 normal washing pro-
gramme without loading any
dishes.
4. Adjust the water hardness set-
ting according to the hardness of
the water in your area.
5. Adjust the rinse aid dosage.
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate.
2. Check that the water tap is opened.
3. Press the On/Off button. The
dishwasher must be in setting mode.
4. Press the button corresponding to
the required programme (see
''Washing programmes'' chart).
When a programme has been selec-
ted the corresponding light illumi-
nates.