Unloading The Dishwasher - Electrolux ESI 45010 User Manual

• If a new washing programme is to be
selected, check that there is detergent
in the detergent dispenser.
Interrupt a washing programme in
progress
• Open the dishwasher door; the pro-
gramme will stop. Close the door; the
programme will start from the point at
which it was interrupted.
• Press the On/Off, all lights will turn off.
Press the On/Off button again; the
programme will start from the point at
which it was interrupted.
End of the washing programme
• The dishwasher will automatically
stop and the programme in pro-
gress indicator light turns off.

Unloading the dishwasher

• Hot dishes are sensitive to knocks.
The dishes should therefore be al-
lowed to cool down before removing
from the appliance.
• Empty the lower basket first and then
the upper one; this will avoid water
dripping from the upper basket onto
the dishes in the lower one.
• Water may appear on the sides and
the door of the dishwasher as the
unloading the dishwasher electrolux 23
• The End indicator light will illuminate.
• The light of the programme just ended
will remain on.
• The digital display turns off.
1. Switch off the dishwasher by press-
ing the On/Off button.
2. 2. Open the dishwasher door, leave
it ajar and wait a few minutes before
removing the dishes; in this way they
will be cooler and the drying will be
improved.
stainless steel will eventually become
cooler than the dishes.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the
water tap turned off.