Table of Contents
Advertisement
1. Unplug the appliance and then turn
off the water.
2. Leave the door ajar to prevent the
formation of any unpleasant smells.
3. Leave the inside of the machine
clean.
Frost precautions
Avoid placing the machine in a location
where the temperature is below 0°C. If
this is unavoidable, empty the machine,
close the appliance door, disconnect the
water inlet pipe and empty it.
What to do if...
The dishwasher will not start or stops
during operation.
Certain problems are due to the lack of
simple maintenance or oversights,
which can be solved with the help of the
Fault codes and malfunction
• continuous flashing of the light of the
running programme
• 1 flash of the End indicator light
The dishwasher does not fill with
water
what to do if... electrolux 27
Moving the machine
If you have to move the machine (moving
house etc...):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and dis-
charge hoses.
4. Pull the machine out together with
the hoses.
Avoid over tilting the machine during
transportation.
indications described in the chart, with-
out calling out an engineer.
Switch off the dishwasher, open the
door and carry out the following sugges-
ted corrective actions.
Possible cause and solution
• The water tap is blocked or furred
with limescale.
Clean the water tap.
• The water tap is turned off.
Turn the water tap on.
• The filter (where present) in the threa-
ded hose fitting at the water inlet valve
is blocked.
Clean the filter in the threaded hose.
• The water inlet hose has not been
correctly laid or it is bent or squashed.
Check the water inlet hose connec-
tion.
Advertisement
Table of Contents
