Multi-Tab Function - Electrolux ESI 45010 User Manual

20 electrolux multi-tab function

Multi-tab function

This appliance is equipped with the
"Multi-tab function", that allows the use
of the "Multi-tab" combi detergent tab-
lets.
These products are detergents with a
combined cleaning, rinsing and salt
functions. They can also contain other
different agents depending on which
kind of tablets you choose ("3 in 1", "4 in
1", "5 in 1" etc...).
Check whether these detergents are
suitable for your water hardness. See
the manufacturers instructions.
Once this function is selected it will re-
main active for all following wash pro-
grammes.
With the selection of this function the in-
flow of rinse aid and salt from each re-
spective supply container is
automatically deactivated and also the
indicator lights for salt and rinse aid are
deactivated.
With the use of the "Multi-tab function",
the cycle durations may change.
Activate/deactivate the ''Multi-tab
function'' before the start of a wash-
ing programme.
Once the programme is running, the
"Multi-Tab function " can NO longer
be changed. If you want to exclude
the "Multi-tab function " you have to
cancel the programme setting and
then deactivate the ''Multi-Tab func-
tion''. In this case you have to set a
washing programme (and desired
options) again.
Activation/deactivation of the
Multi-tab function
Simultaneously press and hold the two
Multi-tab buttons (function buttons D
and E) until the Multi-tab indicator light
illuminates. This means that the function
is active.
To deactivate the function press the
same buttons again until the indicator
light corresponding to the Multi-tab
function symbol turns off.
If the drying results are not
satisfactory we suggest that you:
1. Fill up the rinse aid dispenser
with rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to posi-
tion 2.
• The activation/deactivation of the
rinse aid can only be possible with
the Multi-tab function active.
Activation/deactivation of the
rinse aid dispenser
1. Press the On/Off button. The
dishwasher must be in setting mode.
2. Simultaneously press and hold func-
tion buttons B and C, until the lights