Download  Print this page

Multitab Function; Loading Cutlery And Dishes; Select And Start A Washing Programme - Electrolux ESI 66065 User Manual

Hide thumbs

Advertisement

Table of Contents
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).

MULTITAB FUNCTION

The multitab function is for combi detergent
tablets.
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
Do a check if these tablets are applicable
for the local water hardness. Refer to the in-
structions from the manufacturer.
When you set the multitab function, it stays
on until you deactivate it.
The multitab function deactivates the flow
of rinse aid and salt.
The multitab function deactivates the indica-
tor lights of salt and rinse aid.
The programme duration can increase if
you use the multitab function.
Activate the multitab function before
the start of a washing programme.
You cannot activate the multitab func-
tion when the programme operates.
To activate the multitab function:
1. Switch on the appliance.

LOADING CUTLERY AND DISHES

Refer to the leaflet 'Examples of Real-
Life loads'.
Hints and tips
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove the remaining food from the
items.
• Make soft the remaining burned food on
the items.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that water does not collect in
containers or in bowls.

SELECT AND START A WASHING PROGRAMME

Select and start a washing programme
without delay start
1. Switch on the appliance.
Turn the rinse aid selector
decrease the dosage.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold function buttons D and
E until the multitab indicator light comes
on.
To deactivate the multitab function and use
separately detergent, salt and rinse aid:
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold function buttons D and
E until the multitab indicator light goes off.
4. Fill the salt container and rinse aid dis-
penser.
5. Adjust the water hardness setting to the
highest level.
6. Do a washing programme without
dishes.
7. Adjust the water softener to the water
hardness in your area.
8. Adjust the rinse aid dosage.
• Make sure that cutlery and dishes do not
bond together.
• Make sure that the glasses do not touch
other glasses.
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to pre-
vent them to bond together.
• When you put the items in the baskets,
make sure that the water can touch all sur-
faces.
• Put light items in the upper basket. Make
sure that the items do not move.
• Water droplets can collect on plastic
items and non-stick pans.
2. Make sure that the appliance is in set-
ting mode.
3. Select a washing programme. Refer to
'Washing programmes'.
electrolux 25
4
to increase or

Advertisement

Table of Contents
loading

  Related Manuals for Electrolux ESI 66065