Input Mode; Rename; Source Level; Input Att - Denon AVP-A1HDE Owner's Manual

Resolution
Set resolution for video signal output to HDMI.
[Selectable items] Auto 480p/576p 1080i
1080p:24 Hz
Operating from the main unit
SCALE
Press the button.
Auto 480p / 576p
1080p:24 Hz 1080p
• This can be set when "i/p Scaler" is set to anything other than
"OFF" .
• When the "i/p Scaler" is set to "A to H & H to H" , the resolutions can
be setup to the analog video input signal and HDMI input signal.
• To enjoy 1080p/24 Hz video images, use a monitor which supports
1080p/24 Hz video signals.
• With film source (24 Hz), you can enjoy a film-like image. It is
recommended that you use 1080p/60 Hz for video source and mixed
source.
• It is not possible to convert a 50 Hz signal to 1080p/24 Hz. It is output
at a resolution of 1080p/50 Hz.
• It is not possible to convert a 1080p/60 Hz signal to 1080p/24 Hz.
Progressive Mode
Select optimum progressive mode for video material.
[Input source]
DVD HDP TV/CBL SAT VCR DVR-1
[Selectable items] Auto Video1 Video2
This can be set when "i/p Scaler" is set to anything other than "OFF" .
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Input source]
DVD HDP TV/CBL SAT VCR DVR-1
NET/USB
Full Normal
[Selectable items]
This can be set when "i/p Scaler" is set to anything other than "OFF" .
720p 1080p
g Input Mode
Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
"Assign" setting (vpage 45, 46).
1080i

Input Mode

720p
Set the input mode for this source.
[Input source]
[Selectable items] Analog
[Input source]
[Selectable items] Auto
[Input source]
DVD HDP TV/CBL SAT
TUNER CD
[Selectable items]
Auto
HDMI Digital
When a digital signal is properly input, the "
DVR-2 V.AUX
the display. If the "
connector assignment and the connections.
Operating from the main unit or main remote
control unit
INPUT MODE
Press the
on the main remote control unit.
Auto
z1: This can be selected for input sources for which the GUI menu
DVR-2 V.AUX
"Assign" setting is set to "HDMI" (vpage 45). Excluding CD
and TUNER.
z2: This can be selected for input sources for which the GUI menu
"Assign" setting is set to "Digital" (vpage 46).
( )
PHONO iPod
EXT. IN
NET/USB
EXT. IN
VCR DVR-1 DVR-2 V.AUX
Analog EXT. IN
" indicator lights on
" indicator does not light, check the digital input
INPUT
button on the main unit or the button
z1 z2
HDMI Digital
EXT. IN Analog
Decode Mode
Set the decode mode for this source.
[Input source]
DVD HDP TV/CBL SAT VCR DVR-1
TUNER CD
[Selectable items] Auto PCM DTS
• This can be selected for input sources for which the GUI menu
"Assign" setting is set to "HDMI" or "Digital" .
• Only set "PCM" and "DTS" when playing the respective signals.
h Rename
Change the display name for this source.
Names containing up to 8 characters can be input.
[Characters that can be input]
A ~ Z a ~ z 0 ~ 9 ! " # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
j Source Level
Corrects the playback level of the selected input source's audio
input.
–12dB ~ ~ +12dB
[Variable range] 0dB
For input sources for which "HDMI" or "Digital" are set at the GUI
menu "Assign" setting, the analog input level and digital input level
can be set separately.
k Input Att.
Set when replay sound is distorted because the input level is too
large.
[Selectable items] OFF –6dB
"Input Att. " is effective during DSP processing of analog audio
signals.
DVR-2 V.AUX