Last Function Memory; Backup Memory; Resetting The Microprocessor - Denon AVP-A1HDE Owner's Manual

<STANDARD> <HOME THX CINEMA>
<POWER>
About the button names in these explanations
< > : Buttons on the main unit
[ ]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


Last Function Memory

This stores the settings as they were directly before the standby
mode was set.
When the power is turned back on, the settings are restored to as
they were directly before the standby mode was set.

Backup Memory

The various settings are backed up for about 1 week, even if the
power is turned off or the power cord is disconnected.

Resetting the Microprocessor

Perform this procedure if the display is abnormal or if operations
cannot be performed.
All settings are reset when the microcomputer is reset.
1
<POWER>
Turn off the power using
2
<POWER>
Press while simultaneously pressing
<STANDARD> <HOME THX CINEMA>
and
3
Once the display starts flashing at intervals of about 1
second, release the two buttons.
If in step 3 the display does not flash at intervals of about 1 second,
start over from step 1.
.
.