Denon AVP-A1HDE Owner's Manual page 40

n Manual settings
q Select "Detail".
w S elect the communication mode.
Example) Infrastructure
r S elect the
encryption method.
Example) WEP
t Enter encryption key.
u Select "Connection".
ENTER
q S elect "Detail" and press the button.
w U se the o p button to select the Mode and press the i button.
[Selectable items]
Infrastructure : Select when communication is via an access
point.
Ad-hoc
: Select during direct communication, when an
access point is not used.
e U se the uio p button to input the name of the wireless
ENTER
network (SSID) and press the button.
[Characters that can be input]
A ~ Z a ~ z 0 ~ 9 ! " # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] (space)

r U se the ui button to select the Security and press the i
button.
[Selectable items]
None :
Select if not encrypted.
Can also be used even without encryption, through we
recommend encryption for improved security.
WEP WPA-PSK(TKIP)
WPA2-PSK(AES) :
Select the encryption method according to the encryption setting
of the access point you are using.
t U se the uio p button to input the "Key" (encryption key) and
ENTER
press the
Enter the same encryption key as used for the access point.
e Input the SSID.
[Characters that can be input]
A ~ Z a ~ z 0 ~ 9
When no security settings have been used in the Internet
connection settings, this step is not necessary.
y W hen encryption is by "WEP", select the "Default Key" using
the i button, and then press the o p button.
[Selectable items]
Select the same default key as used for the access point. This
y S et only
should normally be set to "1".
during "WEP"
u U se the i button to select "Connection" and press the
in step r.
button.
Network connection starts.
When connection is established with the access point,
"Connection completed." is displayed.
AVP-A1HD performs automatic network setup due to the DHCP
function.
When connecting to a network that has no DHCP function,
perform the setting in step 4.
WPA-PSK(AES) WPA2-PSK(TKIP)
button.
! " # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
1 2 3 4
ENTER
4
Set the IP address.
b
For details, see page 34 "Wired LAN settings" in step 3.
If you are using a router with no DHCP function to automatically assign
the IP address, set the IP address manually.