Step 3. Align the (3) Scroll Arms with the six holes on top of the motor.
Step 4. Assemble Scroll to the top of the motor using the (6) Scroll to Motor Screws.
Step 5. Feed the wires from the top of the fan
through the Motor Adaptor Cover, the Scroll
Assembly, Trim Ring, Canopy, and Downrod.
Note: Make sure all the wires are on the same side
of the metal dowel pin inside the downrod.
Step 6. Twist the downrod into the Motor Adapter
by turning Clockwise.
CAUTION: The Motor Adapter has a special
coating on the threads. Do not remove this
coating; the coating prevents the downrod
from unscrewing. Once assembled, do not
remove the downrod.
C
oLorado
9