Operation Cfl Mode; Changing Frequency Setting; Operation Lights - Casablanca Panama EnErgy Star C66U11B Owner's Manual

Panama energy star

Hide thumbs

Table of Contents

To turn the lights off and on, press and release the

one second.

Note: With CFL mode active, the lights will not dim.

To dim the down light, Press and hold the

The light will come on at the last brightness setting and increase in brightness

until full power is reached, then start dimming until the lowest setting is

reached. This cycle will repeat until you release the light button.

Note: The control with this fan has been shipped with CFL mode active.

Your fan has the ability to disable the dimming feature to allow the use of CFL bulbs.

To activate CFL mode:

1. Turn the fan off by pressing the

2. Allow the fan to remain off for at least 5 seconds.

3. Press the power button again to restore power to the fan.

4. Immediately press and hold the "1" and "3" buttons for at least 5 seconds. The fans lights will go to 100%

brightness and the dimming function will be disabled.

To cancel CFL mode:

5. Turn the fan off by pressing the

6. Allow the fan to remain off for at least 5 seconds.

7. Press the power button again to restore power to the fan.

8. Immediately press and hold the "2" and "4" buttons for at least 5 seconds. The fans lights will dim to

50% brightness and the dimming function will be enabled. Press and hold the light buttons until the

desired dimmer setting is reached.

You will only have to change the dip switch settings in the

remote if you are using more than one fan in the same

area and want to control them separately.

NOTE: DO NOT set dip switch setting in the remote

to '000000', this may cause frequency interference

from other Casablanca Products. All fans leave the

factory set to

"111111"

OPERATION LIGHTS

button for more than 1 second.