Table of Contents

Advertisement

2
4
5
6
7
8
9
Note!
Using a PIN code prevents other people from accessing your machine without
permission. For security reasons, it is recommended that you change the PIN
code from the default setting of 0000, see

Battery

CAUTION
Risk of explosion if battery is replaced by an incorrect type. Use only original
batteries. The use of non-original batteries may be dangerous and may invalidate
the phone's guarantee.
When the batteries are relatively new they will last for approximately 100 hours
standby time or approximately 10 hours call time. Full battery capacity will not
be reached until the batteries have been charged 4–5 times. It is not possible
to overcharge or damage the batteries by charging them for too long. It may
take up to 10 minutes charging before display illuminates, if batteries are
totally empty.
When the batteries are running low,
heard when a call is in progress. The warning tone is optional, see
settings (HS SETTINGS), p. 5
will flash as long as the handset is charging. In order to save the batteries, the
display is very dark on standby, press L once to illuminate. To save power,
speaker and the display light ceases to operate at low battery strength. When
the battery is low or when there is too great a distance to the base unit the
phone will be unable to connect to a line. Do not place the base unit close to
English
Delete current message
Press once to repeat current message. Press twice
to skip to previous message.
Playback of messages.
Skip forward
Turn the answering machine ON
Stop
Turn the answering machine OFF
Base settings (BS SETTINGS), p. 6

Others

will flash and a warning tone will be
. The battery charge indicator
11
.
Handset
in the display

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents