Expanded System (Two Or More Handsets) - Doro PHONEEASY 110 Manual

System
PIN
Base
reset

Expanded system (two or more handsets)

The call number for internal calls will be displayed in
the display in standby mode. The base unit should be
positioned centrally so that the coverage area is roughly
equal for all handsets.
Register a new handset
All handsets included in the package are already registered
to the base unit. You can register up to 5 handsets to one
base unit.
Note!
This model is GAP (Generic Access Profile) compatible,
which means that the handset and the base unit can both be
used with most other GAP compatible units irrespective of
manufacturer. However the GAP protocol cannot guarantee
that all functions may be accessed.
1. Hold down J (base unit) until indicator flashes.
Press w/0. Scroll to Handset settings. Press w/0.
2.
3. Scroll to Register handset. Press w/0.
Select the base unit Base 1–Base 4 you wish to
4.
register. Press w/0.
5. Enter the base unit's PIN code (default code is 0000).
Press w/0.
6. If the registration is successful the unit will return to
standby mode within one minute.
English
Change PIN code (default code is 0000).
Reset the base to default settings. Enter the
PIN code (default code is 0000) and press
w/0. Press w/0 again to confirm.
13