Table of Contents
Advertisement
English
The Answering Machine (70/70+1)
Number of rings
You can select after how many rings the answering machine will turn on to
answer incoming calls.
To check the current setting press and release the 2 - 9 TS button.
The 2 - 9 TS switch is located on the underside of the base unit, and is activated by using a
ballpoint pen or similar, and pressing it into the opening.
1. Press and hold the 2 - 9 TS button. The message "please set rings" will
be announced.
2. Scroll using
to the required setting (2 - 9 or Toll save).
< < / > >
3. Press and release the 2 - 9 TS button to confirm your setting.
4. Your selected setting will now be announced.
Please note!
The Toll Save function answers calls after approximately five rings, until the first new message
is recorded. Then, the answering machine will answer after approximately two rings. This is
useful when remotely retrieving messages, if there is no answer after three rings, there have been
no new messages recorded and you can hang up before you are charged for the call. If, on the
other hand, the machine answers after two rings, new messages have been recorded.
Voice control
The answering machine uses VOX control to maximise its recording time. If
the caller were to pause or stop speaking for a 8 second period the answering
machine will disconnect from the line.
www.doro.com
15
Advertisement
Table of Contents
