Change the bulbs (4).
Notes
Do not touch the transparent part of the bulb with your
fingers, this will darken it and cause a loss of brightness.
Insert the tabs on the bulb base into the corresponding slots
in the bulb housing to ensure the bulb is correctly positioned;
engage the end of the clip (3, fig. 45) with the mount in
E
the headlight body. Reconnect the wiring.
To renew the sidelight bulb, detach the wiring connector.
The bulb (5) is of the bayonet-type: press and twist anti-
clockwise to remove. Push the new bulb in and turn it
clockwise until it clicks into place. Reconnect the wiring
connector and replace the lens/reflector assembly.
52
4
5
fig. 46
fig. 47