Electrical System - Ducati SUPERBIKE 1098 Tricolore Use And Maintenance Manual

Table of Contents

Advertisement

Electrical system

The main components of the electrical system are:
headlight:
bulb type: 2 x H11 (12 V-55 W).
side light:
bulb type: 2 x H16W (12 V-6 W).
Electrical controls on handlebars:
turn indicators:
Front: LED.
Rear: bulb type: R10W (12 V-10 W)-orange.
Horn.
Stop light switches.
Battery, 12 V-10 Ah.
Alternator 12 V-480 W.
Electronic voltage regulator (rectifier), protected by a 30 A
fuse near the battery.
Starter motor, 12 V-0.7 kW
Tail light and brake light:
LED.
Number plate light:
bulb type: W5W (12 V-5 W).
Notes
See "Replacing bulbs" on page 82 for relevant
instructions.
Fuses
The main fuse box (1, fig. 85) is located on the left of the
frame. The fuses are accessed by removing the cover, on
which are indicated the ampere ratings and fuse positions.
The fuse (2) protects the electronic regulator. Remove the
protective cap to access the fuses.
A blown fuse can be identified by a broken filament (3, fig. 87).
Important
To avoid possible short circuits, switch the ignition key
to OFF before renewing the fuse.
Warning
Never use a fuse with a rating other than that specified.
Failure to observe this rule may damage the electric system
or even cause fire.
E
105

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superbike 1098s

Table of Contents