6.0 Operation
For example:
input: *PWR<cr>
output:AC+:14.376550, AC-:-14.448775, DC+:14.124444, DC-:-14.172626<cr>
HELP<cr> Help command shows all available commands.
For example:
input: HELP<cr>
output: HPDA-15RMi-S Autoswitch Amplifier
Available commands: (type "help <command>" for more info)
*IN
- Select active channel
*IN?
- Query control mode and remote input setting
*SR
- Request instrument status
*CL
- Clear latched status
*ID
- Request identification
*RF
- Read input signal level
*PWR
- Read internal voltage levels
ECHO
- Turn on or off echoing of characters.
SHOW
- Show current configuration.
HELP
- This help screen.
ECHO <cr> Echo on/off command . ECHO OFF turns off the echoing of characters.
SHOW ETH0<cr> Show network configuration command.
This command returns network setting of the instrument.For example:
input: SHOW ETH0<cr>
output: Current ETH0 Configuration:
Status:
IP Address:
Netmask:
MTU:
Ping Config:
Ping Config Done:
DHCP:
DHCP Config Done:
6.4 Alarm Monitoring
up
192.100.0.156
255.255.255.0
1500
off
no
off
no
Page 15
Need help?
Do you have a question about the HPDA-15RMi-S and is the answer not in the manual?