Optional Aql-Chem2 Co; Optional Remote Controls - Goldline Pro LOGIC PL-P-4 Installation Manual

Automation and chlorination
Table of Contents

Advertisement

Optional AQL-CHEM2 CO

The AQL-CHEM2 is a CO
CHEM, the Pro Logic will sense the pool's pH level and automatically dispense the correct amount of CO
the pool's pH to the desired level. Wiring and plumbing requirements for the AQL-CHEM2 should be considered
before installing the Pro Logic. Refer to the AQL-CHEM2 manual for specific installation information.

Optional Remote Controls

Goldline offers a variety of wired and wireless remote control options for the Pro Logic. Each model gives you the
ability to control your pool's functions from a remote location, away from the Control Center.
Wired Remote Controls
Up to 3 wired remote controls can be installed. See page 17 for wiring information.
AQL-WW-P-4
The AQL-WW-P-4 display/keypad must be mounted indoors or in a weather protected area (rain should never touch
the unit). The display/keypad is designed to mount onto a standard electrical utility box (same box as a single light
switch, ideal for new construction) or can be mounted directly onto any wall surface. When selecting a location, note
that the wire to the Pro Logic main unit must be less than 500' long. Refer to the remote's installation instructions as well
as the steps below:
1. Remove display/keypad baseplate from the cover by lifting up on the cover at the lower end of the keypad. See
diagram below.
2. Screw the baseplate in the desired position (screws supplied by installer).
3. See "Electrical Wiring" (page 17) for instructions on running the cable from the Pro Logic main unit to the
remote display/keypad.
AQL-SS-6B-x (x=W or B for White or Black)
The AQL-SS-6B is a double insulated, waterproof device which is intended for installation at the water's edge. The
remote control comes with an attached 150' cable and is typically installed at the tile-line of the spa wall, or in the deck,
within arm's reach of a pool/spa occupant. Refer to the AQL-SS-6B installation manual for specific mounting and
wiring information.
Dispensing Kit
2
dispensing device that connects directly to the Pro Logic. When used with an AQL-
2
Remote Keypad
push up here
to remove cover
6
to control
2

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Goldline Pro LOGIC PL-P-4

Table of Contents