Table of Contents
Advertisement
THE AUTOMAX FUNCTION
This cooker is fitted with a special automatic
heating system called Automax.
The function is engaged each time you
wish to use it. It functions like this:
You select the knob setting for the heat
that you consider suitable for cooking/
roasting. The heating zone starts at the
highest heat setting and goes over
automatically to the selected setting after a
certain time.
Cooking/roasting with Automax
This is how you activate the function.
IMPORTANT! This must be done each time
you wish to use the automatic system.
1 Turn the knob
symbol
2 Then make the desired setting for
cooking/roasting. It takes about
5 seconds before
indication area.
The heater zone display shows
implies that the heating zone operates at
maximum heat for a certain time, depending
on the heating setting selected. See the
diagram.
When the time has expired, there is
automatic switch-over to the set value and
A
the letter
is no longer shown.
If the knob position during heating up
with A
is changed, this function
UTOMAX
disappears and must be re-set.
in general it can be said that settings 2–5
are suitable for cooking and settings 6–8 for
roasting. For heat retention, setting 1 is
suitable. But, as usual, you must experiment
to find the setting and heating zone that is
best for you and your pots and pans.
to the
CLOCKWISE
(spring-loaded position).
A
lights up in the
A
. This
20
Advertisement
Table of Contents
