Table of Contents
Advertisement
Getting started embroidering
1.
After attaching the embroidery unit and embroidery
foot, insert a bobbin with bobbin thread.
2.
Touch the Start Menu. The Design Menu opens to
select a design. Touch & Hold the design you want to
stitch out and it will load to Embroidery Edit.
3.
Hoop a piece of fabric and slide the hoop onto the
embroidery arm.
4.
When you are ready to embroider, switch from
Embroidery Edit to Embroidery Stitch-Out by
touching the GO! icon on the task bar.
5.
Thread the machine with the rst color in the Color
Block list.
Embroidery Set Up
6:5
Advertisement
Table of Contents
