Sewing Pop-Up Messages - Husqvarna Designer Diamond User Manual

Sewing pop-up messages

System busy
An hour glass is shown when the machine is loading,
saving, moving les or anything that takes time.
Bobbin empty
The machine stops automatically and a pop-up message
appears on the screen when the bobbin is almost empty.
Replace the empty bobbin with a full one.
Note: It is possible to sew until the thread has run out. Continue
sewing without closing the pop-up message.
Check needle thread
The machine stops automatically if the needle thread runs
out or breaks. Re-thread the needle thread, close the pop-
up message and start sewing again.
Remove Sensor One-Step Buttonhole Foot
The Sensor One-Step buttonhole foot is used only for
buttonholes. A pop-up message will advise you to remove
it for all other sewing:
• Sewing a stitch that is not a buttonhole.
Sewing
4:23 4:23